NMcAndrew
Joined: Dec 26, 2005
|
Posted:
Aug 29, 2006 - 18:01 |
|
Hi, I'm thinking of cobbling together a pitch and stadium myself, but I don't have any of the original materials to hand. Dice can be replicated/bought, rules are downloadable, figs are being painted (<i>slowly</i>) All I need now is the dimensions for the pitch and it's gridwork and the pass ruler. Many thanks in advance guys |
Last edited by NMcAndrew on %b %31, %2006 - %16:%Aug; edited 1 time in total |
|
Fama
Joined: Feb 09, 2005
|
  Posted:
Aug 29, 2006 - 18:05 |
|
NMcAndrew wrote: | Hi, I'm thinking of cobbling together a pitch and stadium myself, but I don't have any of the original materials to hand. Dice can be replicated/bought, rules are downloadable, figs are being painted (<i>slowly</i>) All I need now is the dimensions for the pitch and it's gridwork and the pass ruler. Many thanks in advance guys |
I think you can count the tiles from the JBB pitch and figure it out for yourself, but I can't help you with the pass ruler since mine is... somewhere. God knows where. |
_________________ I love deadlines. I like the wooshing sound they make when they fly by. -Douglas Adams
Side step this! |
|
BB-Pad
Joined: May 05, 2004
|
  Posted:
Aug 29, 2006 - 20:07 |
|
Your best bet is to check out www.talkbloodbowl.com. There are others there who have made custom pitches and will have right measurements for you. |
_________________ Wanna win a trophy that's made from a donkey's bladder? Then join the Ulysses Maverick Trophy! |
|
NMcAndrew
Joined: Dec 26, 2005
|
  Posted:
Aug 29, 2006 - 20:34 |
|
Thanks a lot guys, I'll give that tbb a shifty and post the results up here just incase anyone else is after this info... |
|
|
NMcAndrew
Joined: Dec 26, 2005
|
  Posted:
Aug 31, 2006 - 16:54 |
|
Ok, so I found an old ratty board in my airing cupboard believe it or not, along with a solitary block dice and the rattiest pass ruler EVAR. So, here are the measurements for those that are interested...
<b>Overall board playing field</b>:
Length - 760mm (<i>including endzone squares</i>)
Width - 440mm
<b>Pass Ruler</b>:
Length - 410mm
Width - 50mm
Thrower marked section - 12.5mm in from end of ruler, in the center. Another 12.5mm from start of quick pass
Quick/Short/Long Pass - 100mm
Long Bomb - 80mm
End excess - 5mm
(<i>12.5 + 12.5 + 100 + 100 + 100 + 80 + 5 = 410</i>)
Hope that helps anyone else keen to get their own board on the go |
|
|